Gold Member Since 2010
Audited Supplier
Tai'an Puhui Electric Technology Co., Ltd.

Reflow Oven, BGA Reflow Oven, Reflow Soldering manufacturer / supplier in China, offering Puhui T960, T960e, T960W Reflow Oven, Reflow Oven for LED, Hot Air and  Infrared Reflow Oven Puhui T961, Best Quality Reflow Oven, Hot Air and  Infrared Reflow Oven Puhui T961 and so on.

(/ )

Supplier Homepage Product reflow oven Puhui T960, T960e, T960W Reflow Oven, Reflow Oven for LED

Puhui T960, T960e, T960W Reflow Oven, Reflow Oven for LED

FOB Price: US $1,200 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $1,200/ Piece
Get Latest Price
Production Capacity: 800 Unit Per Month
Transport Package: 1unit / Wooden Carton, 150*90*65cm
Payment Terms: T/T, Western Union, Paypal
Basic Info
  • Model NO.: T-960
  • Voltage: AC 220V/380V
  • Weight: 90/175kgs
  • Trademark: Puhui
  • Origin: China
  • Power: 4500W
  • Soldering Area: 960*300mm
  • Ce: Passed
  • Specification: CE
Product Description
New and hot sales LED reflow soldering T-960Puhui T960, T960e, T960W Reflow Oven, Reflow Oven for LED

LED New Light Source Reflow Oven

1. This machine selects the intelligent level sirocco and rapid infrared heating technology controlling, equipped with special design wind wheel, speed stability and uniform temperature, suit for uninterrupted soldering the LED and BGA components.

2. This machine is equipped with the crawler-type and five temperature area heating systems, and each temperature area uses independent PID controlling and up-down heating type, can make the inside temperature more accurate and well-proportioned, just take about 15 minutes can let it heat up to the working temperature from the room temperature.

3. Intelligent temperature wave heating type, oversized capacity wave selection, has eight temperature waves can satisfy various welding technological requirements.

4. Use programmable technology, preset the temperature wave memory storage function, can complete the whole welding process automatically according to your presetting wave.

5. Adopt the thermocouple temperature measurement and add the compensation circuit, make the temperature measurement more accurate, the wave more perfect.

6. Use PID intelligent temperature control technology; make the temperature control more accurately. Adopt the imported large current solid-state relay non-contact output can effectively avoid the IC or circuit board damage due to the rapid or uninterrupted warming up, make the whole welding process more scientific safety.

7. Transmission system adopt imported frequency conversion motor, PID closed-loop speed, equip with all the import 1:150 turbine speed reducer, smooth operation, speed adjustable range 0-1600mm/min.

8. Adopt independent wheel structure and special stainless steel strut, durable wear-resisting runs smoothly, speed precision can reach + 10mm/min.

9. Independent cooling zone, to ensure the PCB board of low temperature when the required.

10. Friendly human-machine operation interface, perfect LCD display, no need to connect with the PC, can watch the whole repairing process very clearly.

11. Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T-960 to be easily bench positioned, transported or stored.

Technical parameters

Model

T-960

The heating zone quantity

upper3/down2

The length of the heating zone

960mm

The heating type

intelligent level sirocco and rapid infrared heating

The cooling zone quantity

1

Maximum width of PCB board

300MM

The operation direction

left→right

Delivery options

Net transmission+chain transmission

The speed of conveyer belt

0-1600mm/min

The power supply

Three phase 5 line  380V  50/60Hz

Peak power

4.5KW

Heating up time

Around 15mins

Temperature control range

Room temperature~300°C

Temperature control mode

PID closed-loop control

Temperature control accuracy

±3°C

PCB temperature distribution deviation

±2°C

Overall dimensions

1450×630×470

 

Main parts

Complete machine

1

Tool box

1

Power line

1

User manual(Compact disc)

1

 

Description of the main parts

1. Welding table main body
Idler wheel
 
Horizontal band of the net
 
 
Control cabinet
 
Temp-zone switch
2. Control cabinet Panel
Conveyor belt adjusting knob
 
Press button
 
Motor switch
 
LCD display screen
 
Main power switch
 
Puhui T960, T960e, T960W Reflow Oven, Reflow Oven for LED
Operating Instructions
1. Enter into the setting interface when starts the machine. Press F2 button to select the wave, press F1 to select the point, press F3/F4 to set the corresponding temperature zone up and down, press F5 goes to the heating interface.
2. Five red switches separately control the upper 1/down 1/upper 2/upper 3/down 2 temperature zones.
3. When the temperature gets to balance, open the Motor switch and adjust the conveyor belt speed.
4. Press F2 stop heating, and enter into the setting interface.
5. Each temperature wave purposes as follows:
Wave one and two: use the same with soldering the less lead paste, like 85Sn/15Pb 70Sn/30Pb
Wave three and four: use the same with soldering the more lead paste, like 63Sn/37Pb    60Sn/40Pb.
Wave five and six: use the same with soldering high-melting-point lead-free paste, like Sn/Ag3.5;Sn/Cu.75 Sn/Ag4.0/Cu.5 Sn95.5/Ag3.8/Cu0.7   
Wave seven and eight: use the same with soldering lead-free solder in melting point, like Sn/Ag2.5/Cu.8/Sb.5;Sn/Bi3.0/Ag3.0
6. Attentions:
1.     According to the chips size and welding technological requirements, select the proper wave.
2. Heating temperature regions distribution of upper three areas, and the lower layer 2 areas, corresponding heating waves of the first section/third section/section 4 of the first/second section/each.
3. There are lot kinds of solder paste, every company chooses is also not identical. For these reasons, we design this product can set eight waves, each wave has five sections, each section of the heating time and temperature all can alter. You can reset the heating waves according to the solder required heating temperature and time.
 
Foundation for wave set
1. The reflow soldering theory and the temperature wave
When the PCB board goes into heat up area (dry area), the solvent and gas in the solder paste will evaporate. At the same time, the flux can wet the pad and the component tip and foot. The solder paste melts, caves in and covers the pad, leading to the pad and component pins insulate the oxygen. PCB board goes into heat preservation area. PCB board and components get full preheating. In case of damaging the PCB and components when it goes into the welding area and the temperature heats up quickly. When PCB board goes into the welding area, the temperature heats up and the solder paste melts. When PCB board goes in to cooling area, the liquid solder paste the soldering points solidify. The reflow process is finished. 
The temperature is the key to welding quality. The actual and the setting temperature warming slope and the peak temperature should be accordant. Before the temperature reaches 160, please control the heat up speed in about 1/S. If heat up too quickly, the PCB board and the components will be damaged, and the PCB board may be out of shape. On the other side, the flux volatilizes too fast. And it is easy to make soldering tin ball. Set the peak temperature 20-40 higher than the solder paste melting point. Set the reflow time 10S-60S. If the peak temperature is low or the reflow time is short, it will affect the welding quality, and serious is causing the solder paste does not melt. If the peak temperature is high or the reflow time is long, the metal power will be oxidized and affect the welding quality and serious is causing the component and PCB board damaged.
 
2. The set of the temperature wave
Set the wave according to the solder paste and the above foundation. Different solder paste, choose and set different waves. In addition, the temperature wave has related to the PCB, the density and size of components. Generally lead-free welding temperature should be higher 40 than melting point.
SevenTemperature Area Set
1Set the temperature and belt speed to initial value(usually the manufacturer supply when adjust)
2To the cooling oven, should be preheated for 15-20 minutes.
3. When the temperature is stable, let PCB board pass heat reflow system.  Under this set, the solder paste can reach the reflow critical point. If there is no reflow, to operate as step 4. If the reflow is too fast, please keep correct proportion to increase or reduce the temperature. And let the PCB pass the system again until reach the reflow critical point. Then turn to step 4, only    when there is reflow that is good.
4. If there is no reflow, please reduce the belt speed. For example, now the belt speed is 500mm/min, please adjust it to about 460mm/min. Usually, reduce the speed 10% can increase the temperature about 30F. Another way is that, do not adjust the speed, and increase the temperature properly. The increase range standard is the temperature wave. Adjust the temperature on the basis difference between PCB actual and standard temperature. The adjust range is about 5.When adjust the temperature, it can not exceed the PCB and component bearing capacity.     
 
5. Let the PCB board pass the reflow system in the new speed or new set temperature. If there is no reflow, back to step 4 to adjust again. Or carry out the step 6 for temperature fine-turning.
 
6. The heat temperature wave is adjustable according to the PCB board. You can adjust the transmission belt speed to adjust the temperature. Reduce the belt spend can increase the product heat temperature. On the contrary, you can reduce the product heat temperature.
 
7. Attention: if there is components on the PCB, the PCB pass the reflow and it reflow not very completely, suggest you adjust then reflow again. Usually this cannot damage the components.     
 
8. From low to high when set temperature. If the heat range is over the reflow temperature too high, should increase the transmission speed or reduce the set temperature. The detailed operation is opposite to step 4.
 
Equipment Installation
1Set up field.
1.1Please do the work in the clean environment condition.
1.2Do not put the machine near the electromagnetism interfering resource.
1.3Do not put the oven exits and entrances face towards to the fan and the window.
2Power supply
Please use five-wire system380V. Ensure the machine contacts the earth well and requested professional electrician operation.
3Adjust the reflow oven height.
By adjust the machine leg to adjust the height. The way is follow: use industrial or alcohol gradienter to measure. Then adjust the machine leg to adjust the dryer on all sides till it is completely horizontal.
4Caution:
4.1The working environment should be clean. So the welder quality is good.
4.2Do not use and store the machine out of door, high temperature and humid condition.
4.3During operation take care of the high temperature, avoid scald.
4.4When overhaul the machine, please cut off the power supply to avoid electric shock or cause short circuit.
4.5If move the machine after overhaul, must check all the parts, especially the net-belt position. Cannot make it be lock or fall off.
4.6Ensure the machine is stable, not lean or instable. Adjust the leg under the machine to keep the transmission horizontal. Or the PCB will shift in the transmit process. 
4.7Do not put too big and big absorbed heat components into the oven avoiding damage the net-net and affect the temperature.
4.8Put lubricating oil into the transmission chain every 7 days.
4.9Do not put the inflammable and explosive dangerous goods near the reflow oven.
4.10Do not reach hands into the reflow oven when the machine is in normal working condition.
 
Daily Maintenance
1. Keep the electrical control cabinet clean.
2. Check the fan shaft sleeve is in good condition.
3. Check the fan and the electro-motor have abnormal sound.
4. Be sure the fan does work flexibly.
5. Check the air hole if there are abnormal materials.
6. Check the transmission net-belt is in good condition.
7. Check the electrical chest and electrical equipment have abnormal sound.
8. Check the transmission part if it is in good condition and has abnormal sound.
9. Before turn on the machine, please check the working voltage if it is in the safe voltage and if it is stable. Ensure all the parts can work safely and normally. At the same time, when turn on the machine, check the parameters are the same to the last time turn off. When turn off the machine, do not let the transmission belt in the hot area, please turn off the temperature and when cool down well and stop the transmission belt.
10. Lubricate the driving rolls. Put lubricating oil every two months.
11. The motor works in high temperature for long time, please put lubricating oil twice a week or more, ensure the motor can work normally.
12. Clean the residual goods on the fan blade and motor timely. Or the circuit ages will lead to short circuit and damage the fan.
13. Be sure the machine contacts the earth when use five-wire system

Puhui T960, T960e, T960W Reflow Oven, Reflow Oven for LED

==================== Other Notice ====================

Payment:

* We accept ESCROW and alipay here

* We also accept T/T, Western Union, MoneyGram, etc

Shipping:

·         We do not ship this product by Singapore /HK/ China Post Air Mail. Because it is hard to track and takes more time. Especially, it is not so fafe.

·         We will use FedEx/DHL/UPS/TNT/EMS for fast and safe shipping. We will use the most convenient one when you buy the product.

·         Before shipping, we will pack every product well for you. And please check the outside package when you receive the parcel well

·         If you have special requirement for shipping, please let us know in advance.

 

Warranty : 

·         We provide 12 months Warranty for our products!

·         If you are not satisfied with our products when you receive them, please return it within 10 days for a replacement or money back. Please contact me before you return it.

·         If item is defective in 1 months for product reason, we will send you a replaced spare part without extra charger, or offer refund after we receive the defective item.

·         If item is defective after 1 months, you can still send it back to us. We will fix it for you free of charge and send it back to you, but you should bear the shipping cost..

 
Company Information
 Tai'an Puhui  Electric Technology CO., LTD. Established in 2007,our company is a professional manufacturer engaged in the research, development, production, sale and service of BGA Rewok Station, Infrared Reflow Oven, Microcomputer Electronic heating plate, LED Light Welding Machine. We are located in the chest at the foot of Mount Tai, Qingdao, according to Hong Kong for less than 300 kilometers.
  Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has applied for 16  patents. In addition, we have attained CE certificates.
  Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Europe and America, Australia, Southeast Asia. We also welcome OEM orders.
  To learn more about what we can do for you, contact us at any time. We look forward to establishing a good and long-term business relationship with you.

 
Mr.Bob
Overseas Marketing Manager
Tai'an Puhui Electric Technology Co.,Ltd.

 
 
You Might Also Like
Send your message to this supplier
Avatar
Miss Kelly
Sales Manager
*From:
To: Miss Kelly
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now